DOVETAIL ACCESSORIES

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own.

Adding, removing and repositioning accessories and roof loads is quick and simple with the BASE Rack’s dovetail system, making it easier to install and remove individual items without disturbing any other cargo or lashing points.

UNIQUE DOVETAIL EXTRUSION

The dovetail extrusion extends around both the BASE Rack’s full perimeter and along each edge of the internal beams provides endless mounting and attachment options.

Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won’t collect dust and debris. Each BASE accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.

explore the accessories

Roof rack Lightbar

Complementing the sleek design and mounting system of the BASE Rack, the ARB Roof Rack Light Bar utilises the simple mounting system of the BASE Rack allowing it to be quickly and easily setup.

Sitting at 954mm wide, the mounting system allows for the light bar to be installed either proud of the rack or nicely tucked up underneath.

Features

• Unique reflector design provides optimum distance and width for highway driving

• Reflector design limits light being reflected off vehicle bonnet and bar work

• Combo beam technology provides excellent mid- to long-range spread as well as distance down the road

• Virtually indestructible polycarbonate lens

• Extruded aluminium body with stealth black powder-coat finish

• Unique multi-position mounts suitable for BASE Rack, as well as ARB trade and touring racks

• Brackets included provide two mounting options allowing for placement either in front of or below the rack

• 304 stainless hardware

• Reverse polarity protection

• Breather with pressure-tested seal

• Vibration and UV tested

• Thermal management

• Dust and waterproof to IP68

• Over and under voltage protection

• Protected against radio frequency (RFI) and electromagnetic (EMC) interference

• Two-pin, over-moulded, waterproof plug

• Suitable for use with ARB driving light loom – 3500810 & 3500820

• R10, CE and ROHS certified

• Three-year warranty

Roof Rack Light Bar Kit includes:

• 1 x 36″ light bar

• 2 x Bracket for below rack mounting

• 2 x Bracket for front rack mounting

• 1 x Bracket mounting hardware

Light Bar Lens Cover also available:

• Contains two covers x 22.8m (9.0″)

• Virtually indestructible polycarbonate cover

• Clear hard-coated finish

• UV stable

• Specifically designed to suit the ARB roof rack light bar

• Available in clear, solid black and amber

WIND DEFLECTOR

No longer will there be the fear of additional cabin noise when fitting a roof rack. ARB’s engineers have formed an underside mounting wind deflector, ensuring a quiet and enjoyable driving experience.

FEATURES

• 1.6mm press-formed aluminium

• Press-form shape provides rigidity and strength and aids noise reduction (if you want fancy technical words: it works to reduce vortex shedding effects)

• Durable powder-coat finish

• Vehicle specific

• Pre-cut slots to aid fitment of front-mounted roof rack light bar

• Significantly reduces wind noise associated with roof racks (almost eliminates it on most vehicles)

QUICK-RELEASE AWNING BRACKET

Allowing your awning to be removed from the rack in next to no time by loosening the fasteners before making a ‘slide and lift’ manoeuvre, the Quick-Release Awning Bracket offers additional flexibility in mounting with a ‘high’ and ‘low’ position to suit your vehicle.

FEATURES

• Allows fitment of ARB’s awning range

• Can attach to the dovetail track on the perimeter of the rack

• Quick-release bracket allows your awning to be removed in no time

• Made from strong, powder-coated steel

AWNING BRACKET

Mount your ARB awning securely. The Awning Bracket allows quick fitment of your awning – meaning you spend less time at home packing and prepping and more time at your destination enjoying the great outdoors!

FEATURES

• Allows fitment of ARB’s awning range

• Easy to attach to the BASE Rack – simply secure onto the dovetail track on the rack

• Can attach to the dovetail track at any point on the rack

• Height adjustable

• Made from strong, powder-coated steel

CLASSIC JACK HOLDER

The Classic jack holder keeps the jack secure with two eye bolts attached directly to the dovetail and allows the jack to be mounted in either the foot up or foot down position.

CLASSIC HOLDER FEATURES

• Allows easy fitment of a Hi-Lift Jack™ to your BASE Rack

• Can attach to the dovetail track anywhere on the perimeter

• Made from strong, corrosion-resistant steel

• Includes rubber handle keeper

RECOVERY BOARD HOLDER

When you’re stuck in the sand, you want to be able to access your recovery tracks quickly so you can get on with your adventure. The Recovery Board Holder is a 4 piece fastening kit which is equally suitable for use with TRED Pro and MaxTrax mounting systems.

FEATURES

• Allows easy fitment of recovery boards onto the BASE Rack

• Can attach to the dovetail track at any point on the rack

• Made from strong, corrosion-resistant steel

• To be used with track manufacturer’s mounting hardware

• Suitable for use with ARB TRED Pros and MaxTrax (product specific mounting hardware sold separately)

ROLLER KIT

Loading long pieces of timber and other heavy items can be tricky when you’re alone, but adding a roller to the end of your BASE Rack will alleviate this. The roller helps your equipment to glide onto the rack ready for you to secure and get on your way.

Available in two sizes to suit the standard and narrow racks, the Roller Kit can be attached to any section of the dovetail around the outer perimeter of the rack.

FEATURES

• Allows easy loading onto your BASE Rack

• Can attach to the dovetail track anywhere on the perimeter

• Made from powder-coated aluminium

• Makes long, heavy items easy to load safely onto the roof rack

• Full-width, low-profile roller

AVAILABLE SIZES

• 1,025mm

• 1,185mm

GAS BOTTLE HOLDER

Keeping a gas bottle safe and secure is a must when travelling. Attaching and removing your gas bottle is a breeze with the gas bottle holder. It’s perfect for carrying up to a 9kg gas bottle, comes complete with the base, ratchet strap and two fixing eye bolts and can be secured to an individual beam or span between beams.

features

• Allows easy fitment of a gas bottle to your BASE Rack

• Suits gas bottles between 2kg – 9kg

• Secures to an individual beam or spans between beams

• Eye bolts and strap included to secure the gas bottle

• Durable baseplate with adjustable stainless steel locking bracket

• Solid aluminium clamps and forged steel eye nuts

• Can attach to the dovetail track at any point on the rack

• Made from strong, powder-coated steel

JERRY CAN HOLDERS

It’s often essential to carry extra fuel or water on an off-road trip. Rest assured you can always be prepared with four jerry can holder sizes, perfect to suit your individual needs.

FEATURES

• Allows easy fitment of two jerry cans per holder

• Horizontal or vertical mounting options available

• Secures to two beams (double horizontal & double vertical styles)

• Secures to an individual beam or spans between beam (single & single vertical styles)

• Solid aluminium clamps with forged steel eye nuts, strap included

• Can attach to the dovetail track at any point on the rack

• Holder made from strong, powder-coated steel

• Powder-coated steel support plate (single horizontal & single vertical styles)

• Provision for water tap (double & single vertical holder styles)

SPARE WHEEL Y-STRAP

Securing a spare tyre to your roof rack has never been so simple!

Secure your spare wheel on your BASE Rack with ease, ready to tackle your next adventure. These effective ratchet strap systems secure the tyre in three points on the rack. One strap kit is available with conventional hooks and eye bolt mounts where the other uses a unique dovetail clip which offers a positive connection directly to the rack at all three points.

FEATURES

• 25mm polyester webbing

• For use with BASE Rack without the need for additional tie-down points

• 150kg lashing capacity to AS/NZS4380:2001

• Adjustable one-metre straps suit most tyre sizes

• Supplied with carry bag

RATCHET STRAP (PAIR)

J-hook straps are known for disconnecting from your tie down point between attaching them and fastening them.  These new BASE ratchet straps feature a dovetail profiled hook to offer a positive connection to the rack’s beams meaning no more impromptu disconnects, and no need for additional tie-down points.

FEATURES

• 3m x 25mm polyester webbing

• For use with BASE Rack without the need for additional tie-down points

• 200kg lashing capacity to AS/NZS4380:2001

• Set of two per pack

• Supplied with carry bag

EYE BOLT TIE-DOWN (SET OF FOUR)

Secure your gear quickly and safely. From items such as timber and ladders to swags and camping gear, these eye bolt tie-downs are built tough to handle any load and terrain.

FEATURES

• Provides a lashing point for ratchet straps

• Design to stay securely on the BASE Rack when not in use

• Can attach to the dovetail track at any point on the rack

• Made from strong, powder-coated aluminium

• Forged steel eye nuts

• Set of four per pack

SPRING-LOADED TIE-DOWN (PAIR)

Quick-attach spring-loaded tie-downs are easy to use with a simple one-handed operation. Great for one-off needs and quick loading and unloading, these tie-downs twist on and twist off.

FEATURES

• Quick attachment and release

• Provides a lashing point for ratchet straps

• Easy to attach to the roof rack

• Designed to be taken off the rack when not in use by a simple half turn

• Can attach to the dovetail track at any point on the rack

• Made from strong stainless steel

• Set of two per pack

T-SLOT ADAPTOR (SINGLE OR PAIR)

For the active outdoor adventurer. For use with your existing T-slot compatible accessories. From your bike carrier to your kayak holder, the T-slot adaptor bracket ensures you can easily attach anything to the BASE Rack.

FEATURES

• Allows fitment of accessories from a range of roof rack manufacturers

• Uses a standard T-slot channel to accept T-slot mounted accessories

• Can attach to the dovetail track at any point on the rack

• Available as single or pair