REPLACEMENT SWITCH FASCIA TO SUIT HOLDEN COLORADO AND ISUZU D-MAX

Lightforce Replacement Switch Fascia suitable for the Holden Colorado 2011 onwards

(2011 - 2016 models will require additional switches for Traction Control and Down Hill Descent)

For owners of the Holden Trailblazer wanting to fit a Lightforce Switch Fascia (CBFASCIA2) a replacement A/C switch and harness has been designed to allow for an easy to install, plug and play solution. The harness connects directly to the OEM A/C connector of the vehicle, so no splicing into the vehicle’s electrical system is required.

For owners of pre-facelift Holden Colorado’s (2011-2016) we have designed replacement switches with a plug and play harness that fits directly into the existing OEM connectors.

The fascia is a direct replacement panel, with zero modification to the existing surrounding console, maintaining the OEM look of the vehicle. It will accommodate 3 standard OEM style switches. These can be either single activation or dual activation switches - allowing for up to 6 items to be switched on and off from the comfort of the driver's seat.

Fascia Includes:

2 x CBSWB Switch blanks for Lightforce Fascia.

1 x CBSWTY2 Lightforce Switch.

PRODUCT DETAILS

The standard switch used is the popular and readily available late model aftermarket switch (Lightforce part # CBSWTY2) also compatible with the 200 Series Landcruiser and Prado 150.

A single switch (CBSWTY2) and two switch blanks are provided with the fascia; the blanks have been designed to accommodate the REDARC® Tow-Pro™ remote brake controller. On the back of the blanks are two corresponding indents to aid in drilling the 2 required holes, extra blanks are available.

When fitting the Tow-Pro™ Classic and Elite V2 remote brake controller it is recommended purchasing the optional network cable (P#CBRJ45) as the cable supplied in the original kit will not fit due to space restrictions within the console.

The Elite V3 does not require the use of this network cable.

Fascia finish is matte black, installation takes approximately 30 minutes (excluding accessories) and only requires a 7mm ring spanner and medium screwdriver as the surrounding panels simply pull off (a little force is required as each panel has at least 6 retaining clips).

The fascia relocates in the exact same mounting points as the original, so no additional fixtures or adhesives are required.

The 2 existing 12v outlets will need to be removed from the original fascia and refitted into the new fascia that incorporates the switches. This is where the medium screwdriver is required.

In addition to the switch blank and switch, our optional dual 2.1-amp USB charger is also compatible with this fascia. However, the USB charger will only fit in the centre position.